Table of Contents
Advertisement
Rear Panel
transmitted or received. If the LED is off, nothing is connected, the
connected device is switched off, or there is a problem with the
connection (refer to
automatically adjust to the correct speed and duplex.
5 Cable/DSL Status LED
Green (100 Mbps link) / yellow (10 Mbps link)
If the LED is on, the link between the Router and the cable or DSL
modem is OK. If the LED is flashing, the link is OK and data is being
transmitted or received. If the LED is off, nothing is connected, the
modem is switched off or there is a problem (refer to
"Troubleshooting").
The rear panel
(Figure
Ethernet Cable/DSL port, a power adapter OK LED, and a power adapter
socket.
Figure 4 Router - Rear Panel
6 Wireless Antennae
The antennae on the product should be placed in a 'V' position when
initially installed.
CAUTION: Do not force the antennae beyond their mechanical stops.
Rotating the antennae further may cause damage.
7 ADSL port
Using the RJ11 cable provided, you should connect your Router to the
telephone socket via a splitter.
8 Power Adapter Socket
Chapter 6
"Troubleshooting"). The port will
4) of the Router contains four LAN ports, one
6
7
11
4
3
2
ADSL
Rear Panel
Chapter 6
6
10 8
9
15VDC
1A MAX
OK
1
LAN
Reset
Power
17
Advertisement
Table of Contents
