Before You Install Your Router - 3Com OfficeConnect 3CRWDR200A-75 User Manual

Before you Install
your Router
You will need two suitable screws to wall mount the unit. To do this:
1 Ensure that the wall you use is smooth, flat, dry and sturdy and make two
screw holes which are 150 mm (5.9 in.) apart.
2 Fix the screws into the wall, leaving their heads 3 mm (0.12 in.) clear of
the wall surface.
3 Remove any connections to the unit and locate it over the screw heads.
When in line, gently push the unit on to the wall and move it downwards
to secure.
When making connections, be careful not to push the unit up and off the
wall.Router
CAUTION: Only wall mount single units, do not wall mount stacked units.
Before you install and configure your Router, you need the following
additional information. If you do not have this information, contact your
Internet Service Provider (ISP). Space is provided below for you to
record this information.
If you have a DSL connection and your ISP allocates IP information
dynamically, you need a User Name and Password:
User Name
Password
Service Name
Authentication Method
You only need a PPPoE Service Name if your ISP requires one. Do not
enter anything if your ISP does not require this information.

Before you Install your Router

: ______________________
: ______________________
: ______________________
: ______________________
21