Table of Contents
Advertisement
C
5: R
HAPTER
70
System Tools
Restart
C
OUTER
ONFIGURATION
To activate Content Filtering:
1 Select Firewall from the main menu, then select the Content Filter tab.
2 Check the Enable Content Filter check box.
3 Select the Content Filter Server that you require from the drop-down
list. If you select custom entry, enter the server IP address in the text
box.
4 Select the Server Timeout value in milliseconds. The default is 3000
milliseconds (3 seconds).
5 Select Allow or Deny for each displayed category, as required.
Click Save to save the settings, Test URL to test the connection with
the specified content filter server or cancel to discard your changes.
The main frame of the System Tools screen includes four
administration items: Restart, Time Zone, Configuration, and Upgrade
(Figure
45).
Figure 45 Restart Screen
If your Router is not operating correctly, you can choose to restart the
Router by selecting Restart the Router, simulating the effect of power
cycling the unit. No configuration information will be lost but the log
files will be erased. This function may be of use if you are experiencing
problems and you wish to re-establish your Internet connection. Any
network users who are currently accessing the Internet will have their
access interrupted whilst the restart takes place, and they may need to
Advertisement
Table of Contents
