HP 2605dn Print Drivers System Administrator Manual page 120

Table 8-5
Option
Restricted mode
Device verify level
106 Chapter 8 Manage the HP UPD using HP Managed Printing Administration (HP MPA) and
Active Directory Group Policy
UseMode Settings—Properties panel options (continued)
Description
Select this option to restrict the selection of destination printers not selected
through a defined MPL or normal mode. In Restricted mode, only those
printers defined in the MPL are available for printing. When this box is not
selected (clear), the default is to operate in Normal mode. (Not selected by
default.)
When this option is not selected (clear), the following additional options can
be selected.
●
Show HP UPD dialog settings window.
Select this option to display the link to the HP UPD dialog settings
window. If this option is enabled, a note at the bottom of the
HP Universal Printing dialog box displays the HP Universal Printer
Setting link.
●
Allow user to add printers to OS Printers folder.
Select this option to allow users to create a permanent instance of the
selected printer in the OS printers folder. If this option is disabled, the
Make a permanent instance of this printer in my Printers folder
check box does not appear in the HP Universal Printing dialog box. To
add a printer, use the Add Printer Wizard. (See
client/server using the Add Printer wizard on page
The device verify level controls the HP UPD behavior when the HP UPD is
unable to get model name and PDLs information from the printer. The device
verification level determines if the user is allowed to use the product and the
strictness of compatibility checking. Select one of the following options from
the menu to determine the device-verification level.
●
(Do not specify).
●
Verify communication and compatibility with driver (High).
Select this option to check for the highest level of positive identification.
This option validates that the user has access to the printer and there is
PDL support from a network-connected product or direct-connected
product. If verification fails, you cannot use the address or product. An
error message conveys that the product is unsupported.
●
Verify device ID and Model Name can be obtained (Medium).
Select this option to validate the printer model name, product ID, and
PDL support from a network-connected product or direct-connected
product. If verification fails because the product can not be verified, but
the model is recognized, you are prompted that a driver incompatibility
might exist. At this point, you can cancel out, or continue using the
product at your own risk.
●
Verify port can be opened for printing (Low).
Select this option to verify that the port can be opened before the product
is available for printing. The model name and PDL are verified, but not
validated. This setting assumes that the printer is available and there are
Method 1: Windows
29.)
ENWW