Pre-Configure The Default Settings And Print Policy For Hp Upd - HP 2605dn Print Drivers System Administrator Manual

4 Pre-configure the default settings and
print policy for HP UPD
This chapter outlines several options for configuring the default behavior of the HP UPD. The options
vary based on the installation method selected. Review each option to determine which method is
right for your environment. You can pre-configure the HP UPD default settings before, during, or after
driver installation.
The table at the end of this chapter,
on page 21, lists the available settings for each pre-configuration utility and installation method. This
chapter provides some representative examples, but is not a comprehensive list of available settings.
The information in this chapter will help you select an option that best meets your needs.
In addition to the default driver settings, you can also create a print policy using the available tools to
limit access to certain print features such as restricting printing after a specific time or not allowing
color printing.
The following methods are available for configuring the HP UPD default settings and creating a print
policy:
●
Configure the HP UPD default settings using install.exe during driver installation
●
Configure the HP UPD default settings and/or print policy using the HP Managed Printing
Administration (HP MPA)
●
Configure the HP UPD default settings and/or print policy using Group Policy Objects in Active
Directory
●
Pre-configure the HP UPD default settings using HP Driver Configuration Utility
●
Pre-configure the HP UPD default settings using HP Driver Deployment Utility (DDU)
●
Configure the HP UPD default settings after driver installation in driver preferences
●
Overview of configurable functions and Pre-configuration utilities
ENWW
Overview of configurable functions and Pre-configuration utilities
15