HP 2605dn Print Drivers System Administrator Manual page 44

NOTE:
using the default, make sure that the name you use does not contain the colon ':' character. This
character is not allowed, and will cause configuration and status communication problems with
the printer.
4. Select Create a new port, and then select Standard TCP/IP Port. Click Next.
5. The Add Standard TCP/IP Printer Port Wizard opens. Click Next.
6. The Add Port window opens. In the Host Name or IP Address field, type the DNS or WINS
host name or IP Address (un-check Auto Search in Server 2008). Click the Next button.
NOTE:
ID address changes check box.
NOTE:
connected. Under these circumstances it is best to cancel out of the installation, connect and
turn on the product, and then start over. If you must continue the installation, then under Device
Type, select Standard, and then select Hewlett Packard JetDirect from the menu. Click Next.
NOTE:
from receiving the product configuration, which results in the used default settings
(monochrome, no job storage, etc). Following complete install of the HP UPD, to update the
HP UPD product configuration, right-click on the printer, select Properties, select the Device
Settings tab, scroll down to Automatic Configuration and select Update Now.
7. The Completing the Add Standard TCP/IP Port Wizard window opens. Click Finish.
8. The Install Printer Software window opens. Click Have Disk.
9. Browse to the folder in which the unzipped HP UPD download file is saved.
10. In the unzipped HP UPD file, select any .inf file, and then click Open. You will be prompted to
select a driver name, either the generic name or a version specific name. See
printer driver shared files on page
If an HP UPD is currently installed, select Replace existing driver.
11. Click OK.
12. The Install Printer Software window lists the driver under the Printers box. Select the
HP Universal Printing driver and then click Next.
13. The Name Your Printer window opens.
The name specified In the Printer name: field is the name of the installed printer and displays in
the Printers and Faxes folder. The default printer name is "HP Universal Printing PCL6" for the
first installation. However, this increments to "HP Universal Printing PCL6 (copy1)" and so on for
subsequent installs.
Rename the printer to better identify the printer.
14. Under Do you want to use this printer as the default printer?, select Yes or No. Click Next.
15. The Printer Sharing window opens. Select Do not share this printer, or enter a Share name:
to share the printer. Click Next.
30 Chapter 5 Install and Uninstall of the HP UPD
If you are using an existing port, or if you are specifying the Port Name instead of
If the DNS host name is used for the port, click the Always print to device, even if its
If the Additional Port Information Required window opens, it means the printer is not
Installing the HP UPD with the product disconnected or off line prevents the HP UPD
215.
Versioning of
ENWW