Removal; 1.10 Maintenance Tasks; Product Description And Function; Description - Wilo PW BOOST OPTI Installation And Operating Instructions Manual

en
1.9

Removal

1.10 Maintenance tasks

2 Product description and func-
tion
2.1

Description

6
• Pumping of highly flammable and explosive fluids (petrol, par-
affin, and so on) in their pure form is strictly prohibited!
• Wear protective equipment!
• Switch off the product:
Product with plug: Pull the plug out of the socket. Always
–
pull on the plug, never pull on the connection cable.
Product without plug: Let a qualified electrician disconnect
–
the connection cable from the mains connection.
• Depending on the operating mode and operating time, the
housing parts can exceed 40 °C.
Only touch the product at the recessed grip.
–
Cool down the product.
–
• Clean the product thoroughly.
• If there is a risk of germ formation, note the following points:
Ensure sufficient air exchange.
–
Wear a respiratory mask.
–
Disinfect the product.
–
• Wear protective equipment!
• Do electrical work only by a qualified electrician.
• Do the maintenance work in a clean, dry, and sufficiently lit loc-
ation.
• Clean the product thoroughly.
• Only use original parts from the manufacturer. Using non-ori-
ginal parts releases the manufacturer from any liability.
• Immediately clean up and remove leaked liquids (fluid, operat-
ing fluid). Obey local regulations to dispose of these liquids.
The PW BOOST OPTI self-priming pumps are intelligent pumps with low noise operation.
It is intended for use in the following applications:
• Household booster pump
• Pond and well raw water extraction
• Roof solar water replenishment
Installation and operating instructions • Wilo-PW BOOST OPTI • Ed.01/2024-06