1.4
Protective equipment for
staff
1.5
Transport and storage
1.6
Installation
1.7
Electrical connection
1.8
During operation
Installation and operating instructions • Wilo-PW BOOST OPTI • Ed.01/2024-06
Persons (incl. children) with limited abilities
For these persons, supervise their use or offer guidance on safe
use and possible dangers:
•
Children from the age of 8
•
Persons with decreased physical, sensory, or mental capacities
•
Persons without experience and knowledge
Prevent children from playing with the device.
Prevent children without supervision from cleaning and mainten-
ance.
The mentioned branded articles are non-binding suggestions.
Equivalent products from other brands can also be used. WILO SE
accepts no liability for the articles mentioned regarding their con-
formity to the applicable standards.
Protective equipment: transport, installation, removal, and
maintenance
•
Safety shoes
•
Safety gloves
Protective equipment: cleaning work
•
Safety gloves
•
Safety glasses
•
Respiratory mask
•
Wear protective equipment!
•
Always carry the product by the recessed grip!
•
Wear protective equipment!
•
Do not install damaged or defective products.
•
Do not connect products with a damaged connection cable. To
replace the damaged cable, contact a qualified electrician or
customer service.
•
Install protective earth conductor for mains connection. Obey
local regulations.
•
Install a residual-current device (RCD) with a trigger current of
30 mA.
•
Use fuse protection at the mains connection with a maximum
rating of 10 A.
•
Product without plug: Do the electrical work only by a qualified
electrician.
•
Do not switch on the product if people come into contact with
the pumped fluid.
•
Keep the mains cable and the plug dry.
•
Only insert the plug with dry hands.
•
Pressurised systems must not exceed the maximum pressure of
the pump, see the table of technical parameters.
en
5
Need help?
Do you have a question about the PW BOOST OPTI and is the answer not in the manual?
Questions and answers