Technical Specifications - CENTURION SYSTEMS SDO4 SMART Installation Manual

SECTION 2

2.2. Technical Specifications

Input voltage
Motor voltage
Motor power - rated
Motor supply
Max door width
Max door area
Max holding capacity
Maximum push/pull
force
Operations in standby
mode
Operator travel speed
Door travel adjustment
Safety obstruction force
system
Light
Autoclose
2
Infrared safety beams
Radio receiver
Degree of protection
Receiver code storage
capacity
1. Can operate off a solar supply, please consult Centurion Systems (Pty) Ltd for assistance.
2. Requires infrared safety beams to be fitted.
3. Speed varies with load.
2.3. Fuse Protection
The following protection fuses are provided on the system:
Item
Main controller
Motor circuit
T10
80W DC
Battery supply 2x 12V
3.4Ah
12 square metres
1000N
40kgf
Up to 90 depending on the door size / weight / height /
duration of power failure / condition of batteries
3
Physical Endstops (Automatic limit set)
20x 4-Button NOVA transmitters
Type
ATO
page 11
230V AC @ 50/60Hz
24V DC
Battery supply 2x 12V
6500mm
9m/min
Built-in menu
LED 2W
Menu Selectable
Menu Selectable
(Optional, but recommended)
Code-hopping 433MHz
IPX0 (For interior use only)
SPECIFICATIONS
T12
1
100W DC
3.4Ah
15 square metres
1200N
50kgf
TABLE 1
Rating
15A
TABLE 2
www.centsys.com