Tip-Up Doors - CENTURION SYSTEMS SDO4 SMART Installation Manual

SECTION 6

6.2.2. Tip-up doors

Before commencing the installation, ensure that you have carefully read
and understood all safety recommendations. In particular, ensure that
the installation of the garage door complies with the requirements
specified. Make any necessary adjustments to the garage door BEFORE
commencing the installation!
Important considerations
to note before
commencing installation
• The opening heights are
2135mm for standard
doors
• The structure is level,
square and plumb
• Pivot position No. 1 or 2 (140mm or more head room) is recommended for
automation. If insufficient headroom is available, contact an approved garage door
installer to assist with possible modifications
Door traveling path
The travel path of a garage door is determined by the path that the top section of the
garage door takes as the door is being opened or closed.
Lintel
Header
Travel path of the topmost section of the garage door
Garage door
page 30
OPERATOR INSTALLATION - TIP-UP DOORS
Highest arcing point
Floor
Pivot
point 3
Pivot
point 2
Pivot
point 1
FIGURE 44
Ceiling
FIGURE 45
www.centsys.com