Omcan IC-CN-0089ST Instruction Manual page 22

Troubleshooting
ERROR CODES
Code Fault
E00 Fault free.
E01 Ice skating
board or ice
full switch
fault.
Possible Cause
N/A
Ice skating board deformation.
The ice full switch is faulty or falls
off.
There are ice or foreign objects
caught between the ice skating
board and the evaporator (between
the ice molds) when starting up.
Wiring error or falling off.
Ice skating board magnets fall off.
The ice skating board is not
returned.
N/A
Replace the ice skating board or reinstall
the ice full switch. Judgment method: visual
inspection.
Replace the ice full switch. Judgment
method: open the ice skating board, connect
the power, the fault code E01 displays,
turn off the power, reset the ice skating
board, connect the power again and E01
disappears. If it's not the case, the ice full
switch is faulty.
Remove ice or foreign objects, judgment
method: visual inspection.
Reset the ice skating board or reverse it.
Re-fix the magnet and replace the ice
skating board.
Correct the wiring. Restart the machine after
the above operations.
22
Solution