If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
Safety and Warranty 4. Close supervision is necessary when this appliance is used by or near children. 5. Always unplug from socket when not in use and before cleaning. 6. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been damaged in any manner.
Safety and Warranty Within the warranty period, contact Omcan Inc. At 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
Installation Warning: Keep children away from the foam and other package materials, which is dangerous. 1. Find a location for your ice crusher where it’s protected from direct sunlight and other sources of heat (i.e. stove, furnace, radiator). Place the ice crusher on a level surface. Make sure that there is at least 15cm of space between the back and sides of your ice crusher and the wall.
Operation PREPARING THE ICE CRUSHER FOR LONG-TERM STORAGE • Turn off the machine, unplug the power cord, wipe off the water on the power cord, and gather the power cord up. • Wipe the surface of the machine and the outer surface of the hopper, and open the handle upwards, which is conducive to the internal moisture distribution.
Page 10
Parts Breakdown Model IC-CN-1450-E 47468 Item No. Description Position Item No. Description Position Item No. Description Position AL659 Handle Sleeve for 47468 AL671 Switch Cover for 47468 AL680 Power Cord for 47468 AL660 Handle for 47468 AL672 Screw for 47468...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 16
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the IC-CN-1450-E and is the answer not in the manual?
Questions and answers