Advertisement
Applicable Fluids
Material and Fluid Compatibility Check List for Process Pumps
Chemical
Acetone
Ammonium hydroxide
Isobutyl alcohol
Isopropyl alcohol
Hydrochloric acid
Ozone
Hydrogen peroxide
Concentration 5% or less 50°C or less
Ethyl acetate
Butyl acetate
Nitric acid
Concentration 10% or less
Pure water
Sodium hydroxide
Concentration 50% or less
Super pure water
Toluene
Hydrofluoric acid
Sulfuric acid
Phosphoric acid
Concentration 80% or less
The material and fluid compatibility check list provides values for reference only.
Note 1) Take measures against static electricity, since static electricity may occur.
Note 2) Transmitted fluid may affect other material parts when in contacted with fluids.
• Compatibility is indicated for fluid temperatures of 90°C or less.
• The material and fluid compatibility check list provides values for reference only, therefore SMC does not guarantee the application to our product.
• The data above is based on information provided by the material manufacturers.
• SMC is not responsible for its accuracy and any damage that may happen because of this data.
Compatibility
Note 1, 2)
Note 2)
Note 1, 2)
Note 1, 2)
Note 1, 2)
Note 1, 2)
Note 2)
Note 1, 2)
Note 2)
Table symbols
Note 2)
: Can be used.
: Can be used under
certain conditions.
: Cannot be used.
Back page 1
Advertisement
Need help?
Do you have a question about the Clean Wet PAF3000 Series and is the answer not in the manual?