Server Address Configuration; Local Ip Address - D-Link DP-802 User Manual

D-link systems user's guide nway internet/print server dp-802
Table of Contents

Advertisement

Internet/Print Server User's Guide
(identified by MAC address) so that those IP addresses will not
be used by other devices on the LAN under any circumstances.
(Note that devices listed in the Server Address Settings table
should have their IP addresses listed here if DHCP is going to
be used so that their IP addresses don't get assigned to other
network stations.)

Server Address Configuration

The Server Address Configuration table allows you to setup local
servers, for example an FTP or web site, and provide non-local access
to them through the internet/print server. Entries in the table asso-
ciate a port number with the local IP of a particular LAN server so
that users not on the LAN can access that server.
The internet/print server supports virtual internet servers so that
your single-point ISP internet access can be used to provide exter-
nally-accessible servers for FTP and HTTP. "Virtual Servers" in
this context are "virtual" because they don't have their own public
domain IP addresses in the typical internet fashion. Rather, their
local IP address, with an access port number, is listed in a table in-
side the internet/print server.
internet/print server with the reference to correctly route data r e-
quests.
Note that in LAN-to-LAN mode, this function is disabled and no
LAN devices can be accessed from the internet.
No.
Item number used for entry editing. Maximum of 16 e n-
tries.

Local IP Address

52
The port number provides the
Configuration Settings

Advertisement

Table of Contents
loading

Table of Contents