Table of Contents
Advertisement
Internet/Print Server User's Guide
Nn
On
P
Qn
Sn
Sn?
Sn=v
=v
?
T
Vn
70
Speaker off during dialing and receiving car-
3
rier and turn speaker on during answering.
Automode Detection – This command interacts
with the F command and should be thus used.
Disabled
0
Enabled (Default)
1
Return to Data Mode – after using +++ com -
mand to switch to command mode.
Return to data mode.
0
Perform equalizer retrain sequence, then r e-
1
turn to data mode.
modem to optimize for the best data transmis-
sion. This command works at speeds of 2400
bps or higher.
Force Pulse Dialing
Modem Responses – Determines whether the
modem returns responses after typing a com -
mand.
Send responses to local computer (Default)
0
Do not send response
1
Select S-Register as default
Display the value of S-Register n
Change the value of Register n to v
Set default S-Register to value v
Display the value of the default S-Register
Force DTMF dialing
Response Format – Used with Q com mand.
Numeric response format
0
Word response format (Default)
1
A retrain causes the
Modem AT Commands
Advertisement
Table of Contents
