Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DPR-160
Summary of Contents for D-Link DPR-160
- Page 1 Wireless Print Server Wireless G USB 2.0 Adapter with 3G Mobile Video...
-
Page 2: System Requirements
Note: Using a power supply with a different voltage rating than the one included with the DPR-1260 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. D-Link DPR-160 Quick Install Guide... -
Page 3: Hardware Overview
Connect USB printers using an USB cable. Reset Button Pressing the Reset Button restores the router to its original factory default settings. Power Receptor Receptor for the Power Adapter. LAN Port Connect to a network using an Ethernet cable. D-Link DPR-160 Quick Install Guide... - Page 4 A solid light indicates connectivity to an A solid light indicates a proper USB printer or scanner. connection to the power supply. WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. D-Link DPR-160 Quick Install Guide...
-
Page 5: Installation
MAC address). If you do not see the print server or have UPnP enabled, please refer to the Installation > UPnP section in the manual that is on the D-Link CD. Windows 2000 users: You will need to write down the MAC address located on the bottom of the print server (E.G. -
Page 6: Wireless Settings
If you are connecting to an access point or wireless router, select Infrastructure. If you are connecting directly to a computer with a wireless adapter, click Ad-Hoc. Select None (to use connect to an unsecure network), WEP, or WPA. Click Save to update your settings. D-Link DPR-160 Quick Install Guide... -
Page 7: Wep Encryption
5. Next to Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to 4 different keys. 6. Click Save Settings to save your settings. D-Link DPR-160 Quick Install Guide... -
Page 8: Wpa Encryption
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same as on your wireless router or access point. 5. Click Save to save your settings. D-Link DPR-160 Quick Install Guide... - Page 9 If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section of the manual for assistance. From the Status screen, click on the Setup tab, and then click Next to start the wizard. D-Link DPR-160 Quick Install Guide...
- Page 10 You may need to insert your printer driver CD to load the drivers to your computer. If the autor un screen appears when inserting your printer driver CD, click cancel or close. Click Finish to complete the setup wizard. D-Link DPR-160 Quick Install Guide...
- Page 11 For more information regarding your scanner, please refer to the scanner’s documentation. Unfortunately not all scanners will operate or be detected when connected to the D-Link print server. Please visit http://support.dlink. com for an updated compatibility list. D-Link DPR-160 Quick Install Guide...
-
Page 12: Technical Support
Copyright ©006-00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate based on IEEE Standard 0.11g specifications. Actual data throughput will vary.