Setting Up The Dp-G310; Installing The Print Server - D-Link DP-G310 User Manual

devices or appliances that generate extreme RF noise.

Setting up the DP-G310

Installing the Print Server

WARNING: Configuration problems may result if the Print Server is powered up
without first establishing its network connection.
Follow this procedure to avoid complications at the configuration stage.
1. Confirm proper operation of the printers to be connected to the DP-G310.
2. When you have confirmed proper operation of the printer, switch its power
OFF.
3. Confirm that your network is operating normally.
4. Connect the DP-G310 RJ-45 Connector to the network, using an Ethernet
CAT5 cable.
5. While the printer is powered OFF, install the DP-G310 USB port connector
into the USB port on the network printer using a USB cable.
6. Switch ON the connected printer.
7. Plug the AC power adapter's DC output plug into the DC 5V power socket
on the rear panel of the Print Server.
8. Plug the power adapter into a power outlet. This will supply power to the
Print Server, as it has no external power switch. The green Power LED on
the Print Server's front panel should illuminate steadily, and the Print
Server's Self-Test will proceed.
10