Starting Ps Admin Program; Configure Your Print Server; Choosing A Name For Your Print Server - D-Link DP-313 Quick Installation Manual

Starting PS Admin
If you are using Windows 95/98/Me/2000 or Windows NT 4.0 (or a later version of
Windows) to start the PS Admin program:
1. Press the Start button in the taskbar.
2. Within the Programs menu, select PS Admin.
3. Select the PS Admin program.
For Windows NT 3.51,
1. In the Program Manager, double -click on the PS Admin program group icon to
open it.
2. Double-click the PS Admin program icon.
The PS Admin program will then be ready for use.

Configure Your Print Server

Before you can print over the network using your print server, you may need to perform
some basic setup tasks. These include:

Choosing a name for your print server.

Setting a password to protect your print server's settings from unauthorized
modifications.
Choosing names for the print server's individual printer ports, and changing the port
settings.
Choosing a Name for Your Print Server
Each network Print Server has a server name. When the Print Server is shipped from the
factory, it has a default name of the form PS-xxxxxx, where xxxxxx represents the last six
digits of the Ethernet address found on the Print Server's underside sticker.
It is recommended that you limit your Print Server name to 15 characters , chosen from
the letters A to Z, the digits 0 to 9, and the hyphen ("-") character. Names that violate
this recommendation may not be usable with some networks.