Extended At& Command Set - D-Link DP-802 User Manual

Wn
Yn
Extended AT& Command Set
Command
&Bn
&Cn
&Dn
&F
&Hn
Modem AT Commands
Extended Response Code
Report DTE speed in EC mode. (Default)
0
Report line speed, EC protocol and DTE speed.
1
Report DCE speed in EC mode.
2
Long Space Disconnect
Modem does not send or respond to break sig-
0
nals. (D efault)
Modem sends break signals for 4 seconds b e-
1
fore disconnecting.
Var Description
Data rate, terminal-to-modem
DTE/DCE rate fixed at DTE setting
1
Carrier Detect signal status
Forced to On continuously (Default)
0
Follows the status of remote carrier signal
1
Date Terminal Ready (DTR) operations
DTR off causes modem to hang up
2
Load the default factory settings
Data flow control, DTE/DCE
Flow control disabled
0
71