Table of Contents
Advertisement
Internet/Print Server User's Guide
Enable
Options: Yes/No
Default Value: Yes
Description: This setting is the "on/off" switch for using a
DHCP server. DHCP (Dynamic Host Configuration Protocol)
allows IP addresses to be dynamically assigned. Rather than
assigning a specific local IP address to each station, the inter-
net/print server will assign IPs to each station dynamically if
the DHCP server function is enabled.
IP Address Range -> Start
The range of IP addresses available to the internet/print server for
DHCP allocation is set using two settings. This is the first.
Options:
ranges. The IP chosen must correlate with the End of the
range.
Default Value: 192.168.100.101
Must Be User Modified? No.
Description:
range of IP addresses available for DHCP use in assigning IPs.
It is paired with the next setting to create an address range.
50
an IP address automatically" option under
TCP/IP will have to be selected.
Any IP address within the three reserved IP
This setting indicates the beginning of the
Configuration Settings
Advertisement
Table of Contents
