Internet/Print Server User's Guide
System POST
When the unit is powered on, the system first runs a Power-On Self
Test (POST) as a check of system components. Errors encountered
during the POST are indicated by different flashing front panel LED
combinations.
Note:
DP-802 LED POST Error Indication Table
COM STATE
0
slow flashing
1
on
60
T
ROUBLESHOOTING
The LEDs flash as a normal part of the
system initialization. The error flash codes
listed in the table below will be constant and
thus unlike the brief LED indications at initial
power-on.
LPT STATE
slow flashing
on
ERROR INDICATED
Need to reload firm -
ware
DRAM Error
Troubleshooting
A