Advanced Control Configuration; Manager Server Ip Address; Log And Filter; Dial-Up Schedule - D-Link DP-802 User Manual

D-link systems user's guide nway internet/print server dp-802

Table of Contents

Internet/Print Server User's Guide

Advanced Control Configuration

This setting is the IP address of the computer using the

IS Manager Server software included with the device. The

default IP address is 0.0.0.0.

When set to Yes, the log and filter functions in IS Man-

ager server software will be enabled. The internet server will

create a log of all user connections and their status, viewable

in the IS Manager program. The user filters also become op-

erative,

destination, as defined in the IS Manager program. Default

setting is "No".

The dial-up schedule settings are used to configure the

internet server to dial out only at certain times. Default set-

ting is "No".

Enable

Enables/disables the dial-out scheduling feature.

Schedule Table

filtering

connections

user,

protocol

Configuration Settings

and

Table of Contents