Factory Default Settings - HMS Networks Anybus Wireless Bridge II CAN AWB3006 Startup Manual

Factory Default Settings

6. Factory Default Settings
The Bridge II CAN comes with the following factory default settings.
Default Network Settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Internal DHCP Server
DHCP Interfaces
Default Bluetooth Settings
Operating Mode
Local Name
Connectable
Discoverable
Security Mode
Bluetooth LE
Default CAN Settings
Operating Mode
Bitrate
Ethernet Protocol
Automatic Bus-off
TCP Mode
TCP Port
RX Filter
SP2965 1.4
Static
192.168.0.99
255.255.255.0
192.168.0.99
Disabled
All
PANU (Client)
[generated from MAC address]
No
No
Just works
Operating Mode: Disabled
Connectable: No
Discoverable: No
On
250 kbps
Optimized
Off
Server
5005
Standard, ID 0x0, Mask 0x0 + Extended, ID 0x0, Mask 0x0
®
Anybus Wireless Bridge II CAN
Page 23 of 28
™