HMS Networks Anybus Wireless Bridge II CAN AWB3006 Startup Manual page 15

Connect to LAN, CAN and Power
1. Connect the Bridge II CAN to LAN network.
Table 1. LAN connector pinout
LAN Connector
2. Connect the Bridge II CAN to a CAN network and Power.
Table 2. Shielded 5-pos A-coded M12 male connector
CAN/CANopen/DeviceNet
Connector
SP2965 1.4
Pin Function
1 Transmit +
2 Receive +
3 Transmit -
4 Receive -
5 N/C
Pin Wire Color
1 N/A
2 RD (Red)
3 BK (Black)
4 WH (White)
5 BU (Blue)
Housing N/A
®
Anybus Wireless Bridge II CAN
Function
Drain
Connected to shield
V+ 24 V Power in
V- Power and signal GND
CAN_H
CAN_L
Shield
Act as product FE (Functional Earth)
when the cable shield is connected
to FE.
Page 13 of 28
™