HMS Networks Anybus Wireless Bridge II CAN AWB3006 Startup Manual page 16

® ™
Anybus Wireless Bridge II CAN Configuration
5. Configuration
5.1. Required IP Address Settings
To be able to access the Bridge II CAN built-in web interface you may need to adjust the IP
settings, choose one of the following methods.
The Bridge II CAN default IP address is 192.168.0.99.
Option 1 - Set a Static IP Address on Your PC
On the PC accessing the Bridge II CAN built-in web interface, set a static IP address within
the same IP address range as the Bridge II CAN IP address.
To access the Bridge II CAN built-in web interface, ensure that Port 80 TCP is open in your
PC Windows Firewall.
Note that when you change to a static IP address on your PC, internet access is lost.
Page 14 of 28 SP2965 1.4