Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Beckhoff CP2713
Summary of Contents for Beckhoff CP2713
- Page 1 Manual | EN CP27xx Panel-PC 2024-05-08 | Version: 2.8...
-
Page 3: Table Of Contents
Grounding the Panel PC .................... 27 4.3.3 Connecting cables and power supply ................ 28 Switching the Panel PC on and off.................... 31 5 Beckhoff Device Manager ........................ 33 6 Decommissioning ........................... 35 Disconnecting the power supply and cables ................... 35 Disassembly and disposal....................... 36 7 Maintenance ............................ 37... - Page 4 Table of contents Version: 2.8 CP27xx...
-
Page 5: Notes On The Documentation
EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and registrations in several other countries. ® EtherCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany Copyright © Beckhoff Automation GmbH & Co. KG, Germany. The distribution and reproduction of this document as well as the use and communication of its contents without express authorization are prohibited. -
Page 6: For Your Safety
Exclusion of liability Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the devices outside the documented operating conditions. -
Page 7: Fundamental Safety Instructions
For your safety Fundamental safety instructions The following safety instructions must be observed when handling the device. Application conditions • Do not use the device under extreme environmental conditions. • Only use the device in hazardous areas if it is explicitly designed for this purpose. •... -
Page 8: Notes On Information Security
For your safety Notes on information security The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online, are equipped with security functions that support the secure operation of plants, systems, machines and networks. Despite the security functions, the creation, implementation and constant updating of a holistic security concept for the operation are necessary to protect the respective plant, system, machine and networks against cyber threats. -
Page 9: Product Overview
• 24 V DC power supply unit Push button extension The following panel PCs are optionally available ex factory with a corresponding C9900-G0xx push button extension: • CP2712 (C9900-G002) • CP2713 (C9900-G009) • CP2715 (C9900-G003) • CP2716 (C9900-G004) • CP2718 (C9900-G005) • CP2719 (C9900-G006) •... -
Page 10: Fig. 1 Without And With Push Button Extension
Product overview Fig. 1: Without and with push button extension Version: 2.8 CP27xx... -
Page 11: Structure
Optionally, you can order the following devices with a stainless steel front instead of an aluminum front. For this you need to order the device itself and the ordering option below: • CP2713 (stainless steel front ordering option: C9900-F942) • CP2716 (stainless steel front ordering option: C9900-F945) •... -
Page 12: Fig. 3 Structure Stainless Steel Device
Product overview Fig. 3: Structure stainless steel device Table 2: Legend structure stainless steel device Component Description Clamping lever Mounting the panel PC in the control cabinet wall Silicone seal Protection of the connection section from moisture Name plate Information on the equipment of the panel PC Access to battery and storage media Battery and storage media behind cover Access to interfaces... -
Page 13: Interface Description
Product overview Interface description In the basic configuration, the panel PC includes the following interfaces: • DVI (X103) • USB (X104 - X107) • Ethernet RJ45 (X108, X109) • Power supply (X110) The interfaces are located on the rear side of the panel PC at the bottom in the connection section. Fig. 4: Connection section 3.2.1 The panel PC is equipped with a DVI connector (X103), to which a DVI-capable monitor can be connected. -
Page 14: Usb
Product overview 3.2.2 The panel PC has four USB interfaces (X104, X107). They are used to connect peripheral devices with USB interfaces. Depending on the device generation, the supported USB standard of the four interfaces varies. The following table shows the interface assignment based on the device generation: Table 4: USB interfaces based on device generation Device generation USB interfaces... -
Page 15: Ethernet Rj45
Product overview 3.2.3 Ethernet RJ45 The panel PC has two Gigabit LAN ports (X108, X109). The 100Base-T and 1000Base-T Ethernet standards enable the connection of corresponding network components and data rates of 100/1000 Mbit/s. The required speed is selected automatically. The RJ45 connection technology with twisted-pair cables is used. The maximum length of the cable connection is 100 m. -
Page 16: Power Supply
(0 V) and PIN 6 (24 V) of the socket. If the panel PC is equipped with an integrated uninterruptible power supply (UPS), an external battery pack can additionally be connected to PIN 1 and PIN 2. Beckhoff offers the C9900-U330 and C9900-U332 battery packs for this purpose. -
Page 17: Optional Interfaces
The PCIe module is the Beckhoff definition of a small plug-in card format with a PCIe-x1 bus interface. For ordering options, please contact your Beckhoff Sales department. If you have ordered your device without PCIe module slots and subsequently want to install PCIe modules, you must first send your device to Beckhoff Service for the conversion (see chapter 10.1 Service and Support). -
Page 18: Fig. 10 Name Plate
Product overview xxxxxxxx xxxxxxxxxxxx xxxxxxxxxxxx Fig. 10: Name plate Table 10: Legend name plate Description Model: The last four digits indicate the device generation. Serial number (BTN) Date of manufacture Mainboard Main memory Power supply CFast Display Touch screen Optional slot for PCIe compact modules Optional interface (X101) MAC addresses of the Ethernet interfaces (X108, X109) DVI interface (X103) - Page 19 Product overview Symbols Note: here are the symbols applicable to the device such as CE, EAC, UKCA, . The approvals of your device can be found on the name plate and in chapter 10.2 Approvals. Address of the vendor Access to storage media Access to motherboard battery FCC approval Variant number: commercial number of the order code including ordering options...
-
Page 20: Commissioning
You can either order a Beckhoff protective film individually and fit it yourself retrospectively, or you can order the film for fitting directly ex factory. Please refer to the price list for the available protective films according to the display size of your device. -
Page 21: Transport And Unpacking
4. Check your delivery for completeness by comparing it with your order. 5. Check the contents for visible shipping damage. 6. In case of discrepancies between the package contents and the order, or in case of transport damage, please inform Beckhoff Service (see Chapter 10.1 Service and Support). CP27xx Version: 2.8... -
Page 22: Control Cabinet Installation
The device is designed for installation in the front of a control cabinet in machine and system engineering. The environmental conditions specified for operation must be observed. Dimensions The dimensions of the panel PC can be found on the Beckhoff website: https://www.beckhoff.com/de-de/ support/downloadfinder/technische-zeichnungen/. All dimensions are in mm. -
Page 23: Fig. 11 Delivery State Clamping Lever
Commissioning Fig. 11: Delivery state clamping lever To install and secure the panel PC in the control cabinet, follow the steps shown in Fig. 12 and 13: 1. Insert the panel PC at the intended position in the wall of the control cabinet. Make sure that the device is secured against falling out until it is fastened properly. -
Page 24: Connecting The Panel Pc
Commissioning Fig. 13: Control cabinet installation Also see about this 2 Technical data [} 46] Connecting the Panel PC CAUTION Risk of electric shock Dangerous touch voltages can lead to electric shock. To avoid electric shock, observe the following: • Never connect or disconnect the device cables during a thunderstorm. •... -
Page 25: Mounting Power Supply Cable
If you require a replacement for the voltage connector or the strain relief housing, you can order these from Beckhoff Sales using the following ordering option: • C9900-P926: power supply plug for Industrial PC C5210, C63xx, C65xx, C69xx, CP22xx, CP27xx,... -
Page 26: Fig. 15 Disassembly Of The Strain Relief Housing
Commissioning Fig. 15: Disassembly of the strain relief housing Version: 2.8 CP27xx... -
Page 27: Grounding The Panel Pc
Commissioning 4.3.2 Grounding the Panel PC Potential differences are minimized and electrical currents are diverted to the ground through grounding or potential equalization of electronic devices. This is to prevent dangerous touch voltages and electromagnetic interference. Protective earth The protective grounding of a device serves to avoid dangerous touch voltages. According to the EN 60204-1 standard (Chapter 8 Potential equalization), protective grounding is required if: •... -
Page 28: Connecting Cables And Power Supply
VRLA-AGM lead-acid batteries You can use the UPS output of the power supply unit and connect a Beckhoff Control Panel as a second display. If the supply voltage fails and the panel PC is only supplied by the battery pack, the control panel remains in operation. -
Page 29: Fig. 17 Wiring Diagram C9900-U330
Commissioning Industrial PC power connector Battery Power 24 V 24 V DC L max = 10 m ext. switch 1,5 mm / AWG14 Power status UPS Output 24 V DC 24 V/3,4 Ah 30 V/9 A C9900-U330 battery pack Fig. 17: Wiring diagram C9900-U330 In the case of the C9900-U332 battery pack, PIN 5 and 6 of the battery pack are available for looping through a 24 V supply. -
Page 30: Fig. 18 Wiring Diagram C9900-U332
Commissioning Industrial PC power connector Battery Power 24 V 24 V DC ext. switch L max = 10 m 1,5 mm / AWG14 Power status UPS Output 24 V DC 24 V/3,4 Ah 30 V/9 A C9900-U332 battery pack Fig. 18: Wiring diagram C9900-U332 Version: 2.8 CP27xx... -
Page 31: Switching The Panel Pc On And Off
When you switch on the PC for the first time, the optionally pre-installed operating system will be started. For any additional hardware you have connected, you have to install the drivers yourself afterwards. In addition, the Beckhoff Device Manager starts automatically. The Device Manager is a software from Beckhoff that supports you in configuring the PC. - Page 32 You then use the installation package to install the UPS software components. The UPS software components come with a detailed help function. Call up the help files either directly from the configuration register by clicking the Help button or start the file under Start > Programs > Beckhoff > UPS software components.
-
Page 33: Beckhoff Device Manager
• User name: Administrator • Password: 1 You also have the option of using the Beckhoff Device Manager to remotely configure the industrial PC via a web browser. More detailed information is available in the Beckhoff Device Manager manual. First start Beckhoff Device Manager When your industrial PC is booted for the first time, the Beckhoff Device Manager also starts automatically for the first time. -
Page 34: Fig. 20 Beckhoff Device Manager - Start Page
Secure passwords Strong passwords are an important prerequisite for a secure system. Beckhoff supplies the device images with standard user names and standard passwords for the operating system. It is imperative that you change these. Controllers are shipped without a password in the UEFI/BIOS setup. Beckhoff recommends assigning a password here as well. -
Page 35: Decommissioning
Decommissioning Decommissioning NOTICE Hardware damage due to power supply A connected power supply can cause damage to the device during disassembly. • Disconnect the power supply from the device before starting to disassemble it. As part of the decommissioning of the panel PC, you must first disconnect the power supply and cables. You can then remove the device from the control cabinet. -
Page 36: Disassembly And Disposal
Decommissioning Disassembly and disposal In order to be able to dismount the panel PC from the control cabinet, you must first have disconnected the power supply and the cables (see Chapter 5.1 Disconnecting the power supply and cables [} 35]). To remove the panel PC from the control cabinet, follow the steps shown in Fig. 22 and 23: 1. -
Page 37: Maintenance
You can clean the front screen of the device during operation. In order to avoid inadvertent touch entries when doing this, you must first set the device to "Cleaning Mode" with the help of the Beckhoff Control Tool. Also make sure that you not only clean the display area, but also the edge of the glass pane. Impurities in... -
Page 38: Fig. 23 Select "Cleaning Mode
Maintenance The Beckhoff Control Tool does not start automatically when the device starts up. Proceed as follows to activate the "Cleaning Mode" of the Beckhoff Control Tool: 1. Go to the Beckhoff Control Tool to start it. ð When the tool is started, a small sun symbol appears in the taskbar. -
Page 39: Table 12 Device Component Replacement Recommendations
Beckhoff therefore recommends replacing some of the components of the devices after the time after which predictions of the remaining service life of such components can no longer be reliably calculated. -
Page 40: Fig. 25 Access Device Components
Maintenance • Do not walk around with electronic components in your hand if they are not in ESD packaging. Access to exchangeable device components Access is gained to the battery and storage medium from the back of the panel PC. The components are located on the top of the connection block under a cover. -
Page 41: Replacing The Battery
Replace the battery with R/C (BBCV2), order number RC2032, nominal voltage 3 V. Using any other battery may cause fire or explosion. • Only replace the battery with a replacement battery from Beckhoff Service. • When replacing the battery, make sure that the polarity is correct. -
Page 42: Replacing The Storage Media
If you want to exchange a storage medium according to Beckhoff's recommendation, you must copy the data from the old to the new storage medium. You can use the Beckhoff Service Tool (BST) for this purpose. BST is a graphical backup and restore program for PCs with a Windows operating system. You can create an image of your operating system and use it to back up the operating system. -
Page 43: Fig. 27 Replacing The Cfast
Maintenance Fig. 27: Replacing the CFast The old storage media must be disposed of in accordance with the national electronic waste regulations. CP27xx Version: 2.8... -
Page 44: Exchange Gasket
The silicone seal may become porous after a long operating time. In that case, you should replace the seal to continue protecting the connection section. You can order the following replacement seals from your Beckhoff sales department: Table 14: Ordering options seal... -
Page 45: Troubleshooting
No function of the panel PC No power supply to the panel PC Check the power supply cable Other cause Call Beckhoff Service The panel PC does not boot fully BIOS setup settings are incorrect Check BIOS setup settings (load... -
Page 46: Technical Data
Technical data Table 15: Technical data Product designation CP27xx Weights aluminum front/stainless CP2712: 3.8 kg / 4.1 kg steel front CP2713: 3.6 kg / 3.9 kg CP2715: 4.6 kg / 4.9 kg CP2716: kg CP2718: 6.0 kg / 6.3 kg CP2719: 6.6 kg / 6.9 kg CP2721: kg CP2724: 7.9 kg / 8.2 kg Supply voltage 22-30 V... -
Page 47: 10 Appendix
33415 Verl Germany Phone: + 49 5246/963-0 email: info@beckhoff.de The addresses of the worldwide Beckhoff branches and agencies can be found on our website at http:// www.beckhoff.com/. You will also find further documentation for Beckhoff components there. CP27xx Version: 2.8... -
Page 48: Approvals
Appendix 10.2 Approvals Your device has at least the following approvals: • CE • EAC • UKCA • FCC You will find all other applicable approvals on the name plate of your device. FCC approvals for the United States of America FCC: Federal Communications Commission Radio Frequency Interference Statement This device was tested and complies with the limits for a digital device of class A, according part 15 of the FCC regulations. - Page 49 Grounding bolt for functional earthing ..................Fig. 17 Wiring diagram C9900-U330......................Fig. 18 Wiring diagram C9900-U332......................Fig. 19 Beckhoff Device Manager - Change passwords ................Fig. 20 Beckhoff Device Manager – Start page ..................Fig. 21 Removal from the control cabinet ....................Fig. 22 Removal installation cutout ......................
- Page 50 List of tables List of tables Table 1 Legend structure .......................... Table 2 Legend structure stainless steel device ..................Table 3 DVI interface pin assignment ....................... Table 4 USB interfaces based on device generation ................Table 5 USB interface pin assignment...................... Table 6 Ethernet interface pin assignment....................
- Page 52 More Information: www.beckhoff.com/cp27xx Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl Germany Phone: +49 5246 9630 info@beckhoff.com www.beckhoff.com...
Need help?
Do you have a question about the CP2713 and is the answer not in the manual?
Questions and answers