Safety Warnings - Danfoss R11 User Manual

User Manual
R11 Receiver
Safety instructions
R11 Safety Warnings
Quick reference precautions
Remove the EEPROM in order
When in doube, press the
to disable the transmitter
©
Danfoss | July 2024
W
Warning
Potential damage to the operator or the product. Do not use this product on machines in potentially
explosive atmospheres unless the model is ATEX/RATEX certified to work in such conditions.
Potential damage to operator and product.
Follow the guidelines below to reduce risk of injury to the operator and the product.
•
Use the device with the manufacturer's battery and battery charger (if applicable).
•
Only allow qualified personnel to operate the equipment.
•
Always set the STOP button in the off position when not in use.
•
Always press STOP before plugging in tether cable (if applicable).
•
Remove the Tether connection on the transmitter First (if applicable).
•
Do not operate product when visibility is limited.
•
Make sure product is compatible with the machine.
•
Avoid knocking or dropping the product.
•
Do not use the product if a failure is detected.
Changes or modifications not approved by Danfoss can void the user's authority to operate this product.
Tx Cr 1
Make sure the transmitter
works with the machine
STOP button
to be handled
Cr 1
Do not use the set when
visibility is limited
Avoid knocking or dropping
the set
BC293063716706en-000201 | 5