SSV Works MAVR-PHZ4ATD Manual page 9

I. Use zip ties to tidy up the install.
K. Plug in the 8-pin speaker and 2-pin subwoofer input connectors of
the amplifiers to the factory radio output wiring.
M. Plug in the amplifier's front speaker output to the B-H1385 "Y"
harness and the rear speaker outputs to the B-H1913, 4-pin audio
extension harness.
M1. Plug in the amplifier's subwoofer output to the B-H2702, 2-pin
subwoofer extension cable.
I
J. Plug in the power connector of the amps to the power cable.
K
K
L. Plug in the amplifier turn-on bullet connectors to the turn-on delay
module output wire. See page 4 for reference.
M
M1
N. Remove the panel behind the passenger seat.
J
L
N
9