SSV Works MAVR-PHZ4ATD Manual page 6

TOOLS NEEDED FOR INSTALLATION
A. The MAVR subwoofer enclosure can be mounted under either the
driver or passenger side seat.
C. Remove the (2) 13mm bolt and nut on the front seat rail.
E. Carefully remove the seat.
6
- 10mm, 13mm & 18mm Socket Wrench
A
B. If installing the subwoofer enclosure under the driver seat, use
an 18mm socket wrench to remove the right shoulder seat belt
retractor mechanism. Otherwise, skip to step D.
C
D. Slide the seat forward and remove the rear 18mm seat rail nuts.
E
F. Apply the foam pad (included in the kit) to the flat portion of the
bottom reinforcement tube.
B
D
F