Network Configuration - RGBlink TAO 1mini User Manual

2.5 Network Configuration

TAO 1mini and your computer configuration must be in the same LAN.
There are two ways to configure a network. You can turn on DHCP for automatic capture of IP
address, net mask and gateway or configure IP address, net mask and gateway manually by turning
off DHCP. The detailed operations are as follows.
The first way is to use DHCP to automatically obtain IP.
User should firstly ensure that the switch has access to the network. Then connect TAO 1mini and
the computer to the same switch and in the same LAN.
Finally, turn on DHCP of TAO 1mini for automatic capture of IP. No configuration is needed for your
computer.
The second way is Manual Setting.
Step 1: Click Network icon in Settings for TAO 1mini network configuration. Turn off DHCP and
manually configure IP address, net mask and gateway. The default IP address is 192.168.5.100.
TAO 1mini User Manual
11