RGBlink. If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
1.2 Product Overview TAO 1pro-S is a NDI encoder/ decoder with a 5.5 inch FHD preview display, which also comes with 1 profession-scale SDI input, 1 HDMI 1.3 input and 2 USB 3.0 inputs. TAO 1pro-S is compatible with standard USB 2.0 and USB 3.0 cameras by UVC protocol.
You can see the resolution of the input signal on the 5.5 inch touch screen when there is active signal plugged in. Recommend: TAO 1pro-S is compliance to 1080p50/60 device, once the input signal is interlace or other standard, it is no reco mmend.
For external HDMI 2.0 monitor, only once TAO 1pro-S is used as a converter. 2.4 Connecting Microphone and External Monitor On the left panel of TAO 1pro-S, there is a 3.5mm standard interface which can be directly connected to the microphone.
Chapter 3 Use Your Product Once push the power button to power on TAO 1pro-S, the 5.5 inch display will show TAO logo and then come into the main menu, and once the default input signal is connected, operator can follow the following opera tions to use TAO 1pro-S.
Page 16
1)If DHCP function is closed, you need to set the network of TAO 1pro-S to be the same as decoding NDI source. (Please refer to 3.2.3 Network for operation.) 2)If DHCP function is operated, please connect TAO 1pro-S to a switcher with IP distribution function. Then TAO 1pro-S can search for NDI sources automatically.
If you select Multicast, you can also set Net Mask/ IP Address/TTL. After setting, click [Enter]. 3.2.6 Display Click [Display] to enter the setting page. In this interface, you can set the brightness of the output, HDMI output resolution. In addition, TAO 1pro-S also comes with a screen rotation function. Brightness: 0-100% HDMI Output: 2K, 4K Display Rotation: 0°, 180°...
3.3 Reminder Area TAO 1pro-S also comes with [Reminder Area]. 3.3.1 Mode Switch Reminder Area Users can only operate ONE function (NDI Encoder, NDI Decoder or HDMI Output) at a time. When users choose to switch mode, the tip shown as above will remind users whether to switch function or not.
4.The screen will pop up a message to remind users whether to upgrade the device, you can click [Yes] or [No] according to the requirements. TAO 1pro-S will restart automatically after the upgrade. It is recommended that the users restart the device again after the upgrade.
4.TAO 1pro-S's HDMI output to 4K screen appears incomplete. A: The use of TAO 1pro-S requires that all input and output should be connected before starting up. The plug/plug interface or signal and monitor screen should not be replaced during the process.
0002# Update UI Aster All information herein is Xiamen RGBlink Science & Technology Co Ltd. excepting noted. is a registered trademark of Xiamen RGBlink Science & Technology Co Ltd. While all efforts are made for accuracy at time of printing, we reserve the right to alter otherwise make change without notice.