Safety Precautions; Equipment Ratings - Johnson Controls SABROE UniSAB 4 Installation And Operating Manual

Safety precautions

Missing connectors
Missing connectors can result in direct access to hazard electrical supply pins.
Hot surface
Environmental conditions can result in hazard hot surface of the metal cover.

Equipment ratings

For the electrical and environmental ratings, see the following tables:
Table 1: Electrical conditions
Rated voltage
Rated frequency
Maximum consumption (UniSAB)
Maximum supply fuse
Overvoltage category
Table 2: Environmental conditions
Ambient temperature
Humidity
Altitude
Pollution degree
Note: The UniSAB 4 controller is for indoor use.
Table 3: Ingress protection
IP Class
8
100 VAC to 240 VAC
50 Hz to 60 Hz
10 A
10 A
OVCII
0°C to 55°C, during operation
10% to 90% relative humidity (not condensing)
Up to 2,000 m
PD2
IP55
UniSAB 4 Safety, Installation, and Operating Guide