Table of Contents
Advertisement
Ensure that all connectors are attached to the terminals at all times when the UniSAB 4
controller is powered on. Missing connectors can result in direct access to hazard electrical
supply pins.
-
The metal on the backside of the front can be hot!
1.
Loosen the two screws in the front of the cabinet.
2.
Lift the front cover and position it on the cabinet-top using the bracket located on the back of
the cabinet.
UniSAB 4 Safety, Installation, and Operating Guide
25
Advertisement
Table of Contents
Need help?
Do you have a question about the SABROE UniSAB 4 and is the answer not in the manual?