Related Manuals for HULALA HOME SCYL1018
Summary of Contents for HULALA HOME SCYL1018
- Page 1 HULALA ITEM NO.SCYL1018 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference. 01/17...
- Page 2 MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time.
-
Page 3: Explosive View
EXPLOSIVE VIEW 2PERSONENS 03/17... -
Page 4: Parts List
PARTS LIST 1 04/17... -
Page 5: Hardware List
HARDWARE LIST Ø3*15MM Ø3*20MM Ø4*39MM TOOL LIST HARDWARE SPARE LIST Ø3*15MM 05/17... - Page 6 ASSEMBLY INSTRUCTIONS STEP-1 1.Insert side panel (A3/A4) into the corresponding hole of bottom panel(A2)，make sure all holes aligned and use allen key #B9 to tighten it as picture show. 06/17...
- Page 7 ASSEMBLY INSTRUCTIONS STEP-2 1.Insert vertical panel (A5) into the corresponding hole of bottom panel(A2)，make sure all holes aligned and use allen key #B9 to tighten it as picture show. 07/17...
- Page 8 ASSEMBLY INSTRUCTIONS STEP-3 1.Use screw B2 to attach part B1 to the corresponding hole of top panel(A1), tight screw with screwdriver B10. Ø3*15MM 08/17...
- Page 9 ASSEMBLY INSTRUCTIONS STEP-4 1.Insert the top panel (A1) into the corresponding holes in the pre-assembly step 3, make sure all the holes line up and tighten it with Allen key B9 as shown in the picture. 09/17...
- Page 10 ASSEMBLY INSTRUCTIONS STEP-5 1.open the back panel(A6),insert back panel(A6) into the groove of preassembled step 4 ,make sure all holes aligned and use screw B2 to attach them ， tighten screw with screwdriver B10. Ø3*15MM 10/17...
- Page 11 ASSEMBLY INSTRUCTIONS STEP-6 Attention: Before the next step, adjust the feet of the locker to keep it level. NOT PROVIDED 11/17...
- Page 12 ASSEMBLY INSTRUCTIONS STEP-7 1.insert shelf holder B3 into the corresponding hole of panel(A3/A4/A5),make sure shelf holder B3 are level, and then attach panel(A7) to it. Shelf holder can be adjusted up or down 12/17...
- Page 13 ASSEMBLY INSTRUCTIONS STEP-8 1.attach left door and right door(A8/A9) to pre-assemble unit at step 7. 13/17...
- Page 14 ASSEMBLY INSTRUCTIONS STEP-9 1.use screw B8 to attach part B5 to back (A6) , tight screw with screwdriver B10. Ø3*20MM 14/17...
- Page 15 ASSEMBLY INSTRUCTIONS STEP-10 Ø4*39MM 1.Install the anti-collapse device. 2.Mark the position on the wall, that corresponds to the location of part B5 on the of panel (A6); Drill and insert the expandable screw B4 by hammer. 3.Assemble the part B5 to the wall. Align the hole in the part B5 with the expandable screw B4, use screw B7 to attach it and tighten by screwdriverB10.
- Page 16 ASSEMBLY INSTRUCTIONS STEP-11 1.Let the plastic belt B6 pass through the both part B5 and pull tightly. 16/17...
-
Page 17: Warranty
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive.
Need help?
Do you have a question about the SCYL1018 and is the answer not in the manual?
Questions and answers