Related Manuals for HULALA HOME SCBSD0807
Summary of Contents for HULALA HOME SCBSD0807
- Page 1 HULALA ITEM NO.SCBSD0807 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference. 01/25...
- Page 2 MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time.
-
Page 3: Explosive View
EXPLOSIVE VIEW 2PERSONENS 03/25... -
Page 4: Parts List
PARTS LIST 04/25... -
Page 5: Hardware List
HARDWARE LIST ∅ 3.5*14mm 6*50mm 6*35mm 7*50mm ∅ 6*35mm 4*35mm HARDWARE SPARE LIST ∅ 3.5*14mm 6*50mm 6*35mm 7*50mm ∅ 6*35mm 4*35mm 05/25... -
Page 6: Tool List
HARDWARE LIST ∅ 8*30mm 15*11mm ∅ ∅ 20mm Ø13*6.5*1mm TOOL LIST 06/25... - Page 7 ASSEMBLY INSTRUCTIONS STEP-1 1.Prepare for part (D&C). Align the holes in part (D&C), tighten with screwdriver #18 tighten #6 。 & ∅ 6*35mm 07/25...
- Page 8 ASSEMBLY INSTRUCTIONS STEP-2 Align the holes in part G, insert wooden dowel #8 by hand,Insert panel (C&D) into panel (G),make sure all holes aligned and then insert cam bolt #9 into the corresponding hole of panel (G),and then tighten cam bolt #9 with screwdriver #18.
- Page 9 ASSEMBLY INSTRUCTIONS STEP-3 1.Prepare for part A. Align the holes in part A, insert wooden dowel #8 by hand, tighten with screwdriver #18 tighten #6 。 #6 #8 #8 #6 ∅ 6*35mm ∅ 8*30mm 09/25...
- Page 10 ASSEMBLY INSTRUCTIONS STEP-4 1.Insert the preassemble step 3 into the panel (A),make sure all holes aligned and insert cam bolt #9 into the corresponding hole of side panel(C)&(D),tighten cam bolt #9 with screwdriver #18 . after installation, cover the screw holes with #11.
- Page 11 ASSEMBLY INSTRUCTIONS STEP-5 1.Insert the part (F) into the panel (A),make sure all holes aligned and insert cam bolt #9 into the corresponding hole of side panel (F),tighten cam bolt #9 with screwdriver #18 . after installation, cover the screw holes with #11. 15*11mm ∅...
- Page 12 ASSEMBLY INSTRUCTIONS STEP-6 slide in the part E into the groove in part (C&F) and ( D&F) and. make sure they are also in groove in part A. The grooves must be The grooves must be align completely. align completely. 12/25...
- Page 13 ASSEMBLY INSTRUCTIONS STEP-7 1.Connect the part B the pre-assembled unit in step 6. Insert the wooden dowel #8 into the part C&D as the picture show. Then align the holes in part B,Insert screw #5 and push it down so that it connects to parts C&D. Next,and tighten the screw #5 with an Allen key #17 .
- Page 14 ASSEMBLY INSTRUCTIONS STEP-8 1.Prepare the leg racks. Align the holes of the (H) part with the holes of the (I) part, insert the screw #3 , and tighten the screw #3 with the allen key #17 . 6*35mm 14/25...
- Page 15 ASSEMBLY INSTRUCTIONS STEP-9 1.Connect the leg frame to the cabinet.Attach the leg frame to the pre-assembled unit in step 7 with a screw #2 and tighten #2 with a allen key #17 . & 6*50mm Ø13*6.5*1mm 15/25...
- Page 16 ASSEMBLY INSTRUCTIONS STEP-10 Attention: Before the next step, adjust the feet of the locker to keep it level. 16/25...
- Page 17 ASSEMBLY INSTRUCTIONS STEP-11 1.Insert hardware #10 into part E as shown, screw in screw #1 using screwdriver #18 and tighten fully. #10 x12 ∅ 3.5*14mm 17/25...
- Page 18 ASSEMBLY INSTRUCTIONS STEP-12 1.Use bolt #7 to attach drawer side ( L ＆ K ） to drawer b ack (J),tighten bolt #7 with screwdriver #18 ， and use bolt #7 to attach part (O) to drawer back (J),tighten bolt #7 with screwdriver #18. slide in the part (M) into the groove in part (K&L) .
- Page 19 ASSEMBLY INSTRUCTIONS STEP-13 1.Insert bolt #6 into the corresponding hole of drawer front(N),tighten bolt #6 with screwdriver #18 . 2.Insert drawer front (N) into preassemble step 12 ， make sure all holes aligned and insert cam bolt #9 into the corresponding hole of drawer K&L&O，...
- Page 20 ASSEMBLY INSTRUCTIONS STEP-14 （ ）， 1.Use bolt #4 to attach handle #12 to drawer front tighten bolts #4 with screwdriver #18. 20/25...
- Page 21 ASSEMBLY INSTRUCTIONS STEP-15 Attention ： When installing the drawer.slide the steel ball slide rail of side panel to the most front as picture show 21/25...
- Page 22 ASSEMBLY INSTRUCTIONS STEP-16 1.Attach part #13 to side panel D, C with bolt #1 and tighten the bolt with screwdriver #18 . & #13 x2 ∅ 3.5*14mm 22/25...
- Page 23 ASSEMBLY INSTRUCTIONS ∅ 3.5*35mm STEP-17 1. Mark the position on the wall, that corresponds to the location of bracket #13 on the side panel(C&D) ; Drill and insert the expandable screw #14 by hammer. 2. Assemble the bracket #13 to the wall. Align the hole in the bracket #13 with the expandable screw #14 ,use screw #7 to attach it , tighten screw #7 with screwdriver #18.
- Page 24 ASSEMBLY INSTRUCTIONS STEP-18 1.Let the plastic belt #15 pass through the both part #13 and pull tightly. #15x2 24/25...
-
Page 25: Warranty
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive.
Need help?
Do you have a question about the SCBSD0807 and is the answer not in the manual?
Questions and answers