Screensaver - Satel versa INT-TSG2R-W User Manual

SATEL
Swipe right / left
Tap the screen and slide your finger right or left to swipe the screen right / left (go to the
previous / next screen). When the screensaver is active, swipe right / left to start / end the
slideshow.
The slideshow is available when a memory card containing image files is installed in
the keypad.
Swipe right from the edge (return to the previous screen)
Tap the screen close to the left edge and slide your finger right to return to the previous
screen. This gesture is supported in the user menu and the service menu. You will not be
able to exit the service mode by using this gesture.

4. Screensaver

The installer can disable the screensaver.
The screensaver will be displayed when the keypad is not in use. You can set the time of
inactivity after which the screensaver will be displayed (see: "Setting the auto logout time"
p. 25).
To display the screensaver while using the keypad:
• swipe down on the user screen,
• swipe right on the slideshow.
You will be logged out when the screensaver is displayed.
INT-TSG2R 5