Print Spotted; Print Too Dark; Print Too Light - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Troubleshooting
Probable Cause 2
More than one type or size of paper is loaded.
Corrective Action
Load only one type or size of paper at a time.

Print spotted

Probable Cause
Paper may be dirty.
Corrective Action
Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the
paper tray, and load new paper.
Note:
dust and debris from collecting on the paper or inside the printer.

Print too dark

•
Try retaking the picture with the flash on, or move within the flash range of the camera.
Refer to your camera user's guide for details.
•
Adjust the exposure compensation on your camera, and try taking the picture again.
Refer to your camera user's guide for details.
•
Edit the picture using Kodak Home Center (Windows only) or other image editing
software.
•
Make sure the printer is not placed in direct sunlight or is not operating in a high-
temperature environment.

Print too light

.
Caution:
All-in-One printer.
•
Make sure the paper is loaded with the print side face down. Reload it if necessary.
•
Try taking the picture again with the flash off. Refer to your camera user's guide for
details.
•
Adjust the exposure compensation on your camera and try taking the picture again.
Refer to your camera user's guide for details.
•
Edit the picture on your computer.
94
When you are not using the printer, keep paper tray covers closed to keep
For best results, use Kodak paper and ink cartridges for your Kodak
Kodak ESP 9 Printer User Guide