Loading Plain Paper - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Loading plain paper

Note:
Caution:
paper.
1
Pull the bottom paper tray toward you
Note:
photo paper or Legal plain paper, you must first extend the lower paper tray to its
full length. To do so:
Tip:
release and push the tray until the extension stops moving, and then let go.
2 As needed,
not block the paper from laying flat.
3 Insert the media into the paper tray, with its near edge against the paper stop, with the
print side down.
4 As needed, squeeze and slide the paper-width guide to align it to the left edge of the
media.
5 Lower the paper output tray.
6 Gently push the tray forward in till it is aligned to the edge of the paper output tray.
Kodak ESP 9 Printer User Guide
Review "Things to keep in mind" above.
The automatic document feeder (ADF) on the ESP 9 only accepts plain
To load media that is more than A4 size, such as 4X12 inch panoramic
a Remove all paper from the tray, as needed.
b Press and hold the paper tray
extension-release, located on
the inside of the front of the
lower paper tray.
c Pull the tray extension toward
you gently until it stops moving
easily. DO NOT pull the
extension far enough to
disengage from the paper tray.
d Let go of the tray release, and then load the paper in the tray.
To return the lower paper tray to its default size, press and hold the extension-
squeeze and slide the paper-width guide on the tray
Chapter 4
to the left so that it does
41