Scanned Image Blank; Network Troubleshooting; Wired Network Troubleshooting; Computer Unable To Detect The All-In-One Printer - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Probable cause 5
The memory card you are scanning to does not have enough free space to save the
scanned photo.
Corrective action
Remove some files from the memory card to free up some space.

Scanned image blank

Probable Cause
Your original is not placed correctly on the scanner glass.
Corrective Action
Place your original face down in the proper corner of the scanner glass.

Network troubleshooting

Wired network troubleshooting

Computer unable to detect the All-in-One printer

Probable Cause 1
Cables are not connected properly.
Corrective Action
Check the following cables to ensure they are properly connected.
•
Cables between the hub or router and your computer
•
Cables between the All-in-One printer and the hub or router
•
Cables to and from your modem or printer Internet connection (if applicable)
Probable Cause 2
Your Local Area Network card (LAN card) is not set up properly.
Corrective Action
Verify the setup of your LAN card.
To check your LAN card (Windows)
1 Open the Control Panel.
2
Double-click
System Properties
3 In the
Device Manager
4 Click
Kodak ESP 9 Printer User Guide
System
.
dialog box, click the Hardware tab.
.
Chapter 10
97