Pictbridge Camera Not Detected; Picture Cropped; Picture Print Smudged; Picture Will Not Print - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Troubleshooting
To set a Macintosh to print the first page of a document first:
1 On the File menu, select
2 On the Print dialog, select
3 Select the

PictBridge camera not detected

Probable Cause
The camera is not communicating with the printer.
Corrective Action
•
Make sure the camera is turned on.
•
Check the USB connections from the PictBridge camera to the printer.
•
If disconnected, reconnect the USB cable from the PictBridge camera to the printer.
•
Make sure the connected camera is PictBridge-compatible. See your camera or device
user's guide for details.
•
Check the camera batteries.

Picture cropped

•
Change the picture quality setting (or resolution) on your digital camera to 3:2. See your
camera user's guide for details.
•
Adjust cropped photos using the Kodak Home Center software (Windows only) or
other image editing software on your computer.
•
If you are printing from an application on your computer, select the proper paper size
from the printer options.
Note:
output paper. The dimensions of the photo on the camera are slightly different
from each paper size so a portion will be cropped to fit perfectly on whatever paper
size was selected.

Picture print smudged

Probable Cause
Fingerprints are on the glossy side of paper.
Corrective Action
Handle paper by the edges.

Picture will not print

A selected picture does not print.
92
Print
.
Paper Handling
Normal Page Order
option.
Cropping may vary, depending on the selected picture size and size of the
.
Kodak ESP 9 Printer User Guide