Loading Photo Paper; Loading Envelopes - Kodak ESP 9 ALL-IN-ONE PRINTER User Manual

Handling Paper

Loading photo paper

Note:
Caution:
paper. If you try to run photo paper through it, the printer displays an error
message on the LCD, and the printer will not complete the job.
1
Remove all other paper from the paper tray you plan to use.
2 Insert photo paper into the paper tray print-side down, with the short edge forward. Do
not overload the tray.
3 Slide the paper forward until it stops.
4 Squeeze the paper-width guide and slide it to the right until it just touches the loaded
paper.
5 Lower the paper output tray.
Gently push the tray forward in till it is aligned to the edge of the paper output tray.

Loading envelopes

Warning:
printer.
Note:
1 Remove all other paper from the paper tray you plan to use.
2
Place one or more envelopes along the right edge of the paper tray, with the front side
down and the envelope flaps pointing toward the left side of the tray.
3 Squeeze the paper-width guide and move it to the right until it just touches the loaded
envelope(s).
4 Close the paper tray and lower the paper output tray.
42
Review "Things to keep in mind" on page 40.
The automatic document feeder (ADF on the ESP 9 only accepts plain
Do not load envelopes with cutouts or cellophane windows in this
Review "Things to keep in mind" on page 40.
Kodak ESP 9 Printer User Guide