Kodak all in one printer extended user guide (100 pages)
Summary of Contents for Kodak ESP 9200
Page 1
User Guide • Guide d'utilisation 9200 Series All-in-One Printers • Imprimantes tout-en-un...
Page 2
Support is available! Go to www.kodak.com/go/aiosupport, and select your printer model for: • Frequently Asked Questions (FAQs) • software or firmware upgrades • Extended User Guide • and more! If you prefer, you can chat online, send us an e-mail, or call for technical support. Go to www.kodak.com/go/contact.
Printer Overview This printer lets you print, copy, scan, and fax pictures and documents. Components Control panel 14 Front USB port Automatic document feeder (ADF) 15 MS/XD/SD card slot ADF paper-edge guides 16 Window for photo paper Power cord port...
Displays the main menu; toggles between screens Auto Answer button Turns the fax auto answer feature on or off; when on, the Auto Answer LED (to the left of the button) is lit and the fax answers all incoming calls 10 Redial button...
16 On/Off button Turns the printer on or off 17 Wi-Fi connectivity LED When lit, signals that the printer is connected to a wireless (Wi-Fi) network; blinks when searching for an available Wi-Fi network or when the existing signal is too weak to transmit or receive wireless...
Paper sizes In the main paper tray : 4 x 6 in. / 10 x 15 cm to 8.5 x 14 in. / 22 x 36 cm In the photo paper tray : 4 x 6 in. / 10 x 15 cm to 5 x 7 in. / 13 x 18 cm Loading plain paper The main paper tray capacity is 100 sheets of plain paper.
Page 8
Paper tray extender Front paper-edge guide NOTE: For paper longer than 11 in. / 28 cm, press and pull out the paper tray extender. 4. Fan and stack the paper, then insert it into the tray. 5. Move the paper forward until it stops.
Page 9
KODAK ESP 9200 Series All-in-One Printer 7. Push in the main paper tray until it clicks into place, and lower the output tray. 8. Pull out the output tray extender until it is fully extended. 9. Lift the paper stop.
2. Move the left paper-edge guide to the far left and the front paper-edge guide forward. 3. Fan and stack the photo paper, then insert it (short side first) into the tray with the logo side facing up and the glossy side down.
To place an original on the scanner glass: 1. Remove any originals from the automatic document feeder (ADF). 2. Lift the scanner lid, and place the document or picture face down in the right-front corner. 3. Close the scanner lid.
Basic Functions Using the ADF You can load up to 30 originals (20 to 24 lb / 75 to 90 gsm plain paper) in the automatic document feeder (ADF). The ADF accepts originals from 6.9 x 9.8 in. / 18 x 25 cm to 8.5 x 14 in.
KODAK ESP 9200 Series All-in-One Printer 4. Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS). Printing pictures You can print pictures with your all-in-one printer from: •...
Page 14
3. Press Start to begin printing. The printer prints a single 4 x 6 in. / 10 x 15 cm picture. For more information about printing, see the Extended User Guide at www.kodak.com/go/esp9250support.
4. Press Start Black to make a grayscale scan, or press Start Color to make a color scan. For more detailed information about scanning and for information on scanning from a computer with MAC OS, see the Extended User Guide at www.kodak.com/go/esp9250support.
To receive a fax: 1. Load plain paper into the printer. 2. Make sure the Auto Answer LED is on. (If not, press Auto Answer to turn it on.) When the Auto Answer LED is on, the printer receives all incoming faxes automatically.
Troubleshooting Basic troubleshooting Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Wait five seconds. Turn on the printer. Use the following information to help troubleshoot problems with your printer. Problem Possible Solutions Printer does not •...
• Make sure the paper in the tray is free of tears or creases. • Make sure you do not overload the paper tray. For more information, go to www.kodak.com/go/stepbystep. Select All-in-one printer, then Paper jam.
• Do not attempt to repair or service this product. • If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.
This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.
Need help?
Do you have a question about the ESP 9200 and is the answer not in the manual?
Questions and answers