Print Skewed Or Slanted; Print Spotted; Print Too Dark - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Troubleshooting

Print skewed or slanted

Probable Cause 1
The paper is not properly loaded in the tray.
Caution:
Corrective Action
Realign the paper in the paper tray.
1 Remove paper and check for wrinkles and tears.
2
Slide the paper edge guide away from the paper.
3 Straighten the stack of paper against a flat surface, and reload it into the paper tray.
4 Slide the paper edge guide up against the edge of the paper.
Probable Cause 2
More than one type or size of paper is loaded.
Corrective Action
Load only one type or size of paper at a time.

Print spotted

Probable Cause
Paper may be dirty.
Corrective Action
Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the
paper tray, and load new paper.
Note:
dust and debris from collecting on the paper or inside the printer.

Print too dark

•
Try taking the picture again with the flash on, or move within the flash range of the
camera. Refer to your camera user's guide for details.
•
Adjust the exposure compensation on your camera and try taking the picture again.
Refer to your camera user's guide for details.
•
Edit the picture using Kodak Home Center (Windows only) or other image editing
software.
•
Make sure the printer is not placed in direct sunlight or is not operating in a high-
temperature environment.
82
Kodak Inkjet paper is recommended for your Kodak All-in-One printer.
When you are not using the printer, keep paper tray covers closed to keep
Kodak ESP 7 Printer User Guide