Table of Contents
Advertisement
Inserting and deploying a Kodak Wi-Fi
CAUTION:
Insert the Wi-Fi card as shown. Do not insert an SD or MMC card in
the Wi-Fi card slot.
1
When possible, keep the Wi-Fi card in the retracted (2) position for safe-keeping and
to conserve battery life. To connect to an available Wi-Fi wireless network, push the
card in so that it springs back up to the deployed (3) position (see
■
To remove the Wi-Fi card: from the deployed position, pull it out.
For more information, visit
www.kodak.com/go/support
Using your camera with a Wi-Fi wireless network
®
NOTE: Kodak Wi-Fi
card may be sold separately.
2
Push the card all the way in
to the retracted position.
www.kodak.com/go/wifisupport
®
card
3
Push the card again so it is
in the deployed position.
page
45).
or www.wi-fi.org.
44
Advertisement
Table of Contents
