Picture quality
Problem
Picture is too dark
Picture is too light
Picture is not clear
www.kodak.com/go/support
Possible causes and/or solutions
■
Reposition the camera for more available light.
■
Use Fill flash
(page
the subject.
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF framing brackets turn green, press the
Shutter button completely down to take the picture.
■
Increase the exposure compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn flash off
(page
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF framing brackets turn green, press the
Shutter button completely down to take the picture.
■
Decrease the exposure compensation
■
Select a scene mode that matches the scene you are trying to capture
(page
28).
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF framing brackets turn green, press the
Shutter button completely down to take the picture.
■
Clean the lens
(page
■
Make sure the camera is not in Close-up mode if you are more than
21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
16) or change your position so light is not behind
(page
16).
(page
16).
(page
16).
(page
102).
Troubleshooting
31).
31).
80