Kodak EASYSHARE-ONE-6 MP User Manual page 91

Problem
Camera cannot connect to
a hotspot —
"Camera could not
connect" appears
Camera cannot perform
wireless share functions or
connect to
EASYSHARE Gallery
www.kodak.com/go/support
Possible causes and/or solutions
■
The requirements for connecting to public hotspots vary. Ask
the hotspot administrator about specific authentication
requirements or settings that may be required in order to
connect. Connection to some hotspots may not be supported
by the camera.
See Camera cannot connect to the wireless network,
above, for other possible causes and/or solutions.
■
The Gallery URL, account email address, or account password
on the camera are incorrect.
■
The proxy setting on the camera is incorrect (if required).
■
Make sure the wireless router is connected to the Internet and
an Internet connection is available.
■
The Gallery or online picture service is temporarily unavailable.
Try again later.
■
There may not be an EASYSHARE Gallery service in the region
you are in.
■
If the problem occurs within a hotspot, ask the hotspot
administrator about specific authentication requirements or
settings that may be required in order to connect to the
Internet. Internet connectivity at some hotspots may not be
supported by the camera.
See Camera cannot connect to the wireless network, above, for other
possible causes and/or solutions.
Troubleshooting
84