Table of Contents
Advertisement
Visit
www.kodak.com/go/easyshare-one6mpaccessories
■
Kodak 5-volt AC adapter—powers your camera.
Kodak EasyShare camera dock (series 3 models and newer)—powers
your camera, transfers pictures and videos to your computer, and charges the
Li-Ion battery included with your camera.
Kodak EasyShare printer dock (series 3 models and newer)—powers
your camera, makes 4 x 6 in. (10 x 15 cm) prints with or without a computer,
transfers pictures and videos to your computer, and charges the included Li-Ion
battery. Wi-Fi enabled models let you perform direct wireless printing.
Kodak EasyShare photo printer—makes 4 x 6 in. (10 x 15 cm) prints with or
without a computer. Wi-Fi enabled models let you perform direct wireless printing.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera
dock, printer dock, or photo printer to power your camera.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/easyshare-one6mpdownloads.
Additional care and maintenance
■
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries, memory
card, and Wi-Fi card. Allow all components to air-dry for at least 24 hours before
using the camera again.
Blow gently on the lens or screen to remove dust and dirt. Wipe gently with a soft,
■
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
www.kodak.com/go/support
Appendix
for:
102
Advertisement
Table of Contents
