Table of Contents
Advertisement
– If a matching profile is not on the camera, of if a matching profile exists but
the Connect Mode is set to Manual, the camera screen lists the available
networks. Select the network you want to connect to.
For each network on the list:
Connection type is designated with either
or
The presence of a padlock,
requires a security key to access. Enter the security key if prompted. (Ask
the network administrator for this information if it is unavailable.)
Relative signal strength is indicated by the number of escalating bars,
When a connection is made, the wireless network status light glows steady
green.
If a wireless network is not available or you are unable to connect:
■
– You may be out of the signal range. Move within range.
– The network may not be broadcasting its SSID or network name, so it does
not appear as an available network on your camera. Set up a profile on
your camera to match the network settings (see
– Network settings may not match the settings in any of the profiles in your
camera. Set up a profile on your camera to match the network settings (see
page
47) and try again.
For other reasons that might prevent a connection, see
connection, page
For more information, visit
www.kodak.com/go/support
Using your camera with a Wi-Fi wireless network
(Ad Hoc).
. Green bars indicate a connection to the network.
82.
www.kodak.com/go/wifisupport
(Infrastructure)
, indicates the network is secure, and
page
or www.wi-fi.org.
47) and try again.
Wireless network
46
Advertisement
Table of Contents
