Kodak EASYSHARE-ONE-6 MP User Manual page 42

Taking pictures and videos: more tips and tricks
Setting
White Balance
Choose your lighting
condition.
This setting remains until
you change modes or turn
off the camera.
ISO
Control the camera's
sensitivity to light.
This setting remains until
you change modes or turn
off the camera.
Date Stamp
Imprint the date on
pictures.
This setting remains until
you change it.
Red-eye Pre-flash
Choose if Red-eye
Pre-flash fires before a
picture is taken.
This setting remains until
you turn off the camera.
Color Mode
Choose color tones.
This setting remains until
you change modes or turn
off the camera.
35
Options
Auto (default)—automatically corrects white balance. Ideal for
general picture-taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs. Ideal
for indoor pictures under tungsten or halogen lighting without flash.
Fluorescent—corrects the green cast of fluorescent lighting. Ideal
for indoor pictures under fluorescent lighting without flash.
Auto (default), manual: 80, 100, 200, 400
Choose a lower ISO setting in brightly lit scenes; use a higher ISO
setting in low-light scenes.
Choose a date format, or turn on Date Stamp. (Default is Off.)
On—when Red-eye flash is selected, the flash fires once before the
picture is taken.
Off (default)—when Red-eye flash is selected, the flash doesn't fire
before the picture is taken. Instead, the camera applies internal
red-eye correction to the picture.
To turn Red-eye flash on or off, see
Color (default)—for color pictures.
Black & White—for black-and-white pictures.
Sepia—for pictures with a reddish-brown, antique look.
NOTE: EasyShare software also lets you change a color picture to
black-and-white or sepia.
page 16.
www.kodak.com/go/support