Table of Contents
Advertisement
Troubleshooting
Problem
Flash does not fire
Storage location is
almost or entirely full
You cannot take a
picture
Cannot locate a
picture
Slide show does not
run on an external
video device
Memory card not
recognized or camera
freezes with card
A memory card is
inserted in the Wi-Fi
card slot
79
Possible causes and/or solutions
■
Check the flash setting and change as needed
■
Transfer pictures and videos to the computer
■
Delete unwanted pictures and videos, or insert a new SD/MMC
card
(page
11).
■
Change the image storage location to internal memory by removing
the SD/MMC card.
■
Slide the Capture/View switch to the Capture
■
Turn the camera off, then on again
■
Depress the shutter button completely down
■
Insert a new or charged battery
■
Wait until the AF framing brackets turn green before attempting to
take another picture
■
Slide the Capture/View switch to the View
the Menu button to choose an appropriate view option.
■
The picture may have been transferred to EasyShare software
during synchronization, and removed from your camera. Check the
sync & transfer settings in your EasyShare software. Click the Help
button in the Kodak EasyShare software for details.
■
Adjust the camera Video Out setting (see Video Out under
Changing device settings, page
■
Make sure that the external device settings are correct (see the
device's user's guide).
■
Card may be corrupt. Format card in camera (see Format under
Changing device settings, page
■
Use another SD/MMC card.
■
Using a separate memory card to remove it: with contacts facing
out, insert the card into the Wi-Fi card slot. Gently push the card
against the inserted card to unseat it from the connector. Remove
the card by inverting the camera.
(page
(page
3).
(page
12).
37).
37).
www.kodak.com/go/support
(page
16).
(page
57).
position.
4).
(page
12).
position and press
Advertisement
Table of Contents
